Single phase off grid inverter

DESCRIPTION

BN series Single phase off grid inverter adopt the combination technology of integrating traditional isolated UPS function and solar inverter to provide the flexible and reliable system solution for residential or industrial uninterruptible power requirements

	1024E	1524E	2024E	3024E
Line mode specifications		220 V/230 V Vac ±2 %
AC input voltage		155 Vac~ 272 Vac±2 %
Frequency		50 Hz/60 Hz(Audio detection)
Frequency range	47+0.3Hz ~55+0.3 Hz for 50 Hz;57+0.3 Hz ?65+0.3 Hz for 60 Hz
Over load/short protection		Circuit Breaker
Efficiency		> 95 %
Transfer time		10 ms(typical)
Max Bypass over load current		30 A
Invert mode
Output voltage waveform		Sine wave
Rated output power (VA)	1000	1500	2000	3000
Rated output power (W)	1000	1500	2000	3000
Power factor		1
Output voltage (V)		230 V ac
Output voltage regulation		± 10 %
Output frequency (Hz)		50 Hz ±0.3 Hz/60 Hz ±0.3 Hz 10 %
Efficiency		> 80 %
Overe load protection	(110 % < load < 125 %) ±10 % : Fault (shut down output )after 15 minuts: (125 % < load <150 %) ±10 % :fault (shut down output ) after 60 s : load> 150 % ±10 % : fault (shutdown output ) after 20 s
Surge ratings(10 s)	3000 VA	4500 VA	6000 VA	11000 VA
Capable of starting electric motor		1 HP		2 HP
Output short circuit protection		Current limit(fault after 10s)
Bypass breaker size		10 A	30 A
Nominal DC input voltage/min DC start voltge		24V/22V
DC voltage range	20.0 V dc~30 Vdc,± 0.60V dc regultion (low alarm :21 v ;20 V high fault :32 V ;High Recovery
POwer saver	Load ≤ 25 W (Enabled on "P/S auto " setting of remote control):31 V
AC OUTPUT 2 (LOAD)
Charge current	20 A	25 A	35 A	50 A
Charge current regulation		±5dc
Baterry initial voltage		20-31.4 V dc
Charger short circuit protection		Circuit breaker
Breaker size		30 A
Over charge protection	Over charge protection Bat.V ≥ 31.4 V dc beeps 0.5 s ever 1 s & fult after 60
Charger (solar)
MPPT voltage range		15-90 V
Max PV open circuit voltage		90 V
Rated charge current		50 A
Efficiency		98%
Overload protection (DC load )	2.0 x nom > 20 s,1.5 nom temperture control
Baterry temperature sensor	BTS-optional remote battery temperture sesor for increased charging precision
Standby power consumption;		5 W
General specifications
Safety Certification /EMC classification		CE(EN62040-1),EN62042-2,C2
Protection class		IP20
Operating temperature range	150º C TO 40º C (-25º C~ 60º C for storage)
Operation humidity		5 % to 95 %
Audible noise		60 dB max
Commmunication;		RS-485/RS-232/Remote control
Size	381 mm x 217 mm x179 mm		461 mm x 217 mm x 179 mm

FEATURES

Protection class IP20

Isolated internal transformer design to ensure the stability and reliability

Capable of providing the continuous power to linear load or non-linear load of lamp, computer , fridge ,air-conditioner and the industrial device

MPPT solar charging technology

Electricity Quick charging function

Multiple charging voltage grads to adopt to more battery Topology’s, to maximize battery performance

Overload and short circuit protection

Multiple working mode are optional for different working priority (grid /battery/saving mode )

User friendly multiple communication module( RS485,RS232,Ethernet,GPRS ,WIFI ) are optional to be compatible with more monitoring device : mobile :computer ,internet /remote option

Support 12/24 V battery , 120 V/230V(50/60 Hz)